Prefabricated Steel Truss Roof Structure for Warehouse Construction
prefabricated steel truss roof
,warehouse steel roof structure
,steel frame building construction
| Attribute | Value |
|---|---|
| Surface Treatment | Painted Or Galvanized |
| Product Resistance | Corrosion Resistant |
| Building | Prefabricated Steel Structure |
| Install | Support Installation |
| Structure | Steel Structure |
| Working Scope | Design, Fabrication, Installation |
| Size | Customized |
| Construction | Steel Frame |
The steel truss roof is a structural system composed of rods connected by hinges at each end. These planar or spatial structures utilize triangular elements with members primarily subjected to axial tension or pressure, maximizing material strength efficiency. Compared to solid web beams, truss structures offer significant advantages for large spans, including material savings, reduced dead weight, and increased stiffness.
We provide complete solutions including structural design, fabrication of all steel components (columns, beams, purlins, etc.), and full installation services including structural assembly and panel/window/door installation.
- Light Frame Steel Construction
- Hangar Design
- Prefabricated Steel Structure Factory Buildings
- Workshop Warehouses
Our pre-engineered steel buildings utilize modern technology where complete designs are factory-prepared, with components delivered to site for bolted assembly (no welding required). Efficient designs can be up to 30% lighter than conventional steel buildings, reducing material costs while maintaining structural integrity.
- Material: Q345B (S355JR) or Q235B(S235JR)
- Construction: Welded/Hot Rolled H section steel
- Surface: Hot Dip Galvanized or Painted
- Connection: All Bolts Connection
- Roof Purlin: C or Z Section Steel, Q235B
- Wall Purlin: C or Z Section Steel, Q235B
- Bracing: Steel Rod, Q235B
- Cross Support: Steel Rod, Q235B
- Column Support: Angle Steel; Steel Rod; Q235B
- Angle Brace: Angle steel, Q235B
- Tie Bar: Steel Pipe, Q235B
- Single Colorful Corrugated Steel Sheet (Thickness: 0.3-0.8mm)
- Sandwich Panel with EPS, Rock Wool, Fiberglass, PU (Thickness: 50-150mm)
- Door: Sliding or Rolled Up Door (Manual/Auto)
- Window: Aluminum Alloy or PVC
- Downspout: PVC pipe
- Gutter: Galvanized Steel Sheet or Stainless Steel
- Ventilator: Stainless Steel Turbine Ventilator
- Skylight Belt: FRP or PC semi-transparent
- Flash: Color Steel Sheet
- Fittings: Anchor Bolt, High Strength Bolt, Standard Bolt, Self-tapping nail

All structural components, panels, bolts, and accessories are packed using standard ocean transportation packaging and loaded into 40'HQ containers. Our skilled workers use cranes and forklifts at our factory loading site to ensure damage-free loading.

Why us?
1. Professional design team, we could design the drawing as your requirement or calculate the steel quantity based on your drawing.
2. Skilled fabrication team and advanced equipment. We make the independent production schedule to each project.
3. One-stop service: We have completed lots such kinds of projects, we could provide the integrated proposal for your project.
4. Professional QC team will guarantee that we will provide the production and service as your request.
5. After sales service: If it has any questions that need us to do in your process of using, such as the maintain of outside insulation and steel components, just tell us , we will try to provide the service as well as we can.
| 1 | Location (where will be built?) | _____country, area |
| 2 | Size: length*width*height | _____mm*_____mm*_____mm |
| 3 | wind load (max. wind speed) | _____kn/m2, _____km/h, _____m/s |
| 4 | snow load (max. snow height) | _____kn/m2, _____mm |
| 5 | anti-earthquake | _____level |
| 6 | brickwall needed or not | If yes, 1.2m high or 1.5m high |
| 7 | thermal insulation | If yes, EPS, fiberglass wool, rockwool, PU sandwich panels will be suggested; . if not, the metal steel sheets will be ok. The cost of the latter will be much lower than that of the former |
| 8 | door quantity & size | _____units, _____(width)mm*_____(height)mm |
| 9 | window quanity & size | _____units, _____(width)mm*_____(height)mm |
| 10 | crane needed or not | If yes, _____units, max. lifting weight____tons; max. lifting height _____m |
FAQ
1. What are the main differences between a steel structure office building and a steel workshop?
Steel office buildings focus on office comfort, sound insulation, daylighting, facade aesthetics and public building fire compliance. It adopts light long-span steel frame with higher requirements for interior finishing, noise control and thermal insulation. Steel workshops are designed for heavy equipment load, crane load and mechanical vibration resistance, with heavier main steel frames and priority given to industrial operation.
2. Can the facade adopt glass curtain wall?
Sure. Glass curtain wall, aluminum veneer, stone-like coating and integrated thermal insulation wall panels are all optional facade solutions. We can customize the exterior style according to your aesthetic requirements.
3. What are the main steel materials used?
Main frame: Q355B H-section steel. Secondary components: Q235B steel. Surface treatment: sand blasting + multi-layer anti-corrosion and fire-proof paint or hot-dip galvanizing as options.
4. How many floors can the steel structure office building be built?
Conventional design: 2–6 floors. Higher floors can be customized after professional structural calculation according to local wind load, seismic standard and land conditions.
-
JYidongxiang's construction speed is truly remarkable. Our 10,000-square-meter warehouse was completed and delivered within just 45 days after the contract was signed. Moreover, their overall service is very professional. From design to installation, there are dedicated personnel handling each step. We hardly had to worry about any details.
-
As a general contractor, we chose Yidongxiang after comparing three suppliers. Their design team can accurately meet our storage requirements, the material thickness and anti-corrosion treatment are well done, and the customer acceptance passed on the first try.
-
DWe need warehouses with snow-resistant structures in our logistics park in Toronto. The design team of Yidongxiang optimized the roof load according to the local climate and adopted thickened H-shaped steel and a snow accumulation drainage system. Last year, during the rare heavy snowfall, the warehouse suffered no damage at all and the quality exceeded expectations completely.